Fitters
comments on this installation: "rears were straight forward just keep them high
to avoid metal beam behind the bumper, grommet on the offside floor. The front
needed both headlights removing and the front grille just one screw for the
lights and about ten plastic screws on the grille, wire can be routed around the
n/s to the back of the battery where there is a big grommet that comes in behind
the fuse box, junction box can go above the fuse box I used a switch to activate
them. Fronts were 1840S with long cables rears were 1840V"
Please note that these photo's are of customers' vehicles and should be used for informational purposes only, the installation instructions supplied with the Parking Sensor kit should be adhered to at all times.
Please Note that Parking Sensor systems are designed to be a drivers aid and should not replace the need to drive carefully, we will not accept liability for damage or loss resulting from improper installation or use of this product, infringement of the vehicle manufacturer’s warranty or injury or loss resulting from any accidents however caused.
![Visa Delta [1258 bytes]](http://reversing-sensors.co.uk/photos/VISD.gif){kind=small}
