|
>> THIS MODEL IS NO LONGER
STOCKED <<
|
Wireless
Parking Sensor Kit with 4 Round Recessed Sensors for easy installation on
Cars, Vans, HGV's, Caravans, Trailers and Motorhomes.
The sensors and CPU are fitted to the
rear of the vehicle (or Caravan) powered by the reversing light. The Display is mounted
on the dashboard, needing only a 12v power supply.
There
is a wireless connection between the Display and CPU. |
|
|
|
Recessed sensors
are supplied in Black and can be colour coded to match vehicle bumper.
Requires
20mm hole.
External
Diameter: 22mm
Recessed
17mm into bumper. |
|
4051RF, Wireless
Parking Sensor Kit, containing:
-
CPU (Central
Processing Unit)
-
Colour
LCD Digital Read Out
-
Wireless
CPU to Display communications
-
4
"Black" Round Recessed
Sensors (for rear of vehicle)
-
Speaker
built into display
-
Wiring
for vehicle
-
Fitting
Instructions
-
12
Month Warranty
-
4x
Under Bumper Brackets or 20mm Drill Bit (hole saw)
Maximum
wireless range is 12 metres (between CPU and Display)
LCD
Display Unit dimensions:
|
|
Wireless
Parking Sensor Kit can be fitted to Caravans with reversing
lights.
Click
on Photo for larger image.
Approximate
Cable Lengths:
-
Length between
CPU and Sensors is 2.4 metres
-
Length between
CPU and
Power supply is 1 metre
-
Length
of CPU Wireless Aerial wire is 35cm
-
Length between
Display and
Power supply is 2.4 metres
|
Features
>
Detection
distance: 0.10 to 2.50 metre
>
Audible
alert when object is within 1.5 metre.
>
Volume
Control on Display: High, Low or Off (Mute)
>
3
Colour display that changes as vehicle moves closer to the object; Green,
Yellow and Red.
The
LCD Display stand can be removed to allow the display to be fitted to
vertical surface.
|
|
Click
here to Listen to a demonstration of the sound emitted from this
Parking Sensor Kit. |
System
Activation
When
reverse gear is engaged the rear sensors are automatically activated.
Wiring
and Installation
The
components are supplied pre-plugged and ready to install, with the
exception of the following power cables that must be connected to the
vehicle:
CPU:
>
Red Wire - Connect to the Revering light positive feed.
>
Black & Red Wire - Connect to a negative power supply (earth).
Digital
Display:
>
Red
Wire - Connect to Accessory positive feed. >
White Wire - Connect to a negative power supply (earth). Sensors: The
sensors must be mounted on a vertical surface between 50-70cm from the ground
when using the "In Bumper Fitting" option to prevent the ground being falsely
detected. The
"Under Bumper fitting" option allows the sensors to be angled away
from the ground and can be mounted lower than 50cm from the ground. External
Mounting The
CPU must be mounted inside the vehicle, this kit is also available with a
weatherproof CPU for external mounting on trailers, pick ups, commercials etc.
Please contact us to place
a special order.
>> THIS MODEL IS NO LONGER STOCKED <<
|
Option
1 - Under Bumper fitting
4051RF
Wireless 4 Sensor Parking Sensor Kit supplied with 4 Under Bumper
Brackets, suitable for installation on Caravans, commercials, trailers and
HGV's.
|
|
|
Option
2 - In Bumper fitting
4051RF
Wireless 4 Sensor
Parking Sensor Kit supplied with 20mm Drill Bit (hole saw) for fitting Recessed Sensor
into vehicle bumper.
|
|
The price you see is the price you
pay, there are NO hidden extras. The price includes Next Day Delivery within United Kingdom
&
standard international signed delivery within the rest of the European Union.
VAT is also included.
Please ensure you read our Terms
and Conditions, for estimated delivery times click
here.
|
![Visa Delta [1258 bytes]](http://reversing-sensors.co.uk/photos/VISD.gif){kind=small}
